We highly recommend this fuse bypass switch if you need to deactivate a fuse when you flat tow. It's a huge pain to pull the fuse by hand every time, and you risk losing or damaging it. With this kit, you just have to flip a switch.
Features:
Specs:
Note: Consult your owner's manual to determine which fuse to pull.
Technically, it is optional, but if you need to pull a fuse on your vehicle when you flat tow, this kit will make your life so much easier. Instead of wedging yourself down on the floorboard and fishing a tiny fuse out from under your dashboard every time you flat tow (not to mention putting it back again), you can just flip a switch. No dead battery, no lost fuse, no damaged fuse, no back pain.
When the switch is in the drive position, the fuse will be active and your car will function normally. When you're ready to flat tow, you'll flip the switch to the tow setting and deactivate the fuse. This allows you to tow your vehicle without the battery draining.
Installing this fuse bypass switch really only takes a few steps:
1. Open the fuse access panel and remove the designated fuse
2. Connect the end of the wiring harness to the fuse socket
3. Mount the switch in your dashboard
4. Insert the pulled fuse into the fuse holder
See the installation instructions for more details!
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
Ratings & Reviews
I recently ordered the Blue Ox fuse by pass switch for my Honda CRV. My order was sent out promptly and the staff at e trailer were knowledgeable and friendly! Please note: If you have a 2013 Honda CRV, this install takes a while due to the position of the fuse panel .Honda uses the mini fuses and you must purchase a standard fuse to place inline.....no big deal but, small hands and a contortionists body would make installation very much easier.
The switch was for a mini fuse car, mine has the squished mini fuses and took forever to get the wire prongs into the fuse block. I have a 2010 CRV and was disappointed, but it works for now, (until the prongs fall out)
Great product, installed in 5 minutes. Will really save me a lot of time and keep me from getting on my knees with a flashlight and straining to pull and later reinstall the fuse! Item was installed in my 2012 Equinox.
The Blue Ox Accessory Kit for the Aventa LX Tow Bar, the extra (2) Diodes, the Fuse By-Pass Switch, the Aventa LX Tow Bar and the Patriot Brake Unit all arrived in tact and in a timely manner. I really appreciate the help in defining what I need to tow my '09 Yukon behind our new Newmar Dutch Star. So far the wiring is complete - and works! I hope to have the Tow Bar hardware done this week - i'll try and get a picture. Thanks again!
This product works great for the purpose it is intended. Unfortunately, removing fuse #34 also disabled my 12v accessory and made it impossible to use my Blue Ox Patriot II. Weird because there are separate fuses for those. Therefore I have to return it.
I installed your device in a Buick Terraza to disengage the power sliding door control when the intermittent alarm sounds while driving. It saves me from having to pull over and pull the fuse. Thank you for your product.
Purchased and installed in my 2010 Chevy HHR. Was an easy install, directions are very clear. This allows me to leave the key in the correct position while the vehicle is under tow by my RV and not drain the battery. However, I later determined that this meant my HHR brake lights would not operate when the brakes are applied by my Brake-Buddy system. I did install wiring from the RV to the brake lights of the HHR but that did not run the third/middle brake light. So I ultimately decided to install a system that connects my RV power to a charger on the HHR battery so I could leave the power on and have all my brake lights operating. As it turns out I could have done without this item. So it would be a choice of this item or an RV powered charging system depending upon how you would like your brake lights to operate.
Once again wiring too short for a 2014 Honda CRV to install it where there video shows also it was missing the connector to the fuse block. Wasted tiem and money splicing longer wires in.
Fuse Bypass switch works great no more dead batteries, I have used it many times in the last year and I can pull my Honda CRV 8hrs or more and battery stays charged. very easy to install. took less than 1 hour to install
Pins are a pain to keep in while installing. Should have a dummy fuse to plug in with the wires connected to the pins. Also, the fuses don't match the ones they are bypassing in my car. I use micro fuses in my panel and the fuse holders take mini fuses.
The concept is GREAT however and a real time saver removing the time spent on your knees in the dirt fishing around to find the two fuses you need to pull out of the fuse panel and wearing the fuse panel more and wore with each pull.
Easy to install with great directions. Etrailer has great Customer Service even after the sale. Perfect for what I needed....now I don't have to take out the fuse every time I tow my car behind the Motorhome! Great experience with etrailer.
Works great, easy to install.
I have installed the Custom Tail light warning and the Trailer connector and it was very easy. I ran the wiring through inside the FIT wiring and it was very easy. Love the way everything snaps together.
I can't wait to install the base plate, trailer hitch receiver as well as the ByPass switch.
All these items will make our Motorhome experience much easier. Thanks etrailer
Thanks again to Amanda for keeping an eye on my order.
Was very easy to install, works like it should.
As advertised delivered quickly
Age of [online vendor], when items ordered and have expected delivery day, then it takes more than 24hrs to ship during business week. That’s a fail.
sed on my 2016 Ford C-Max Energi to stop pulling fuse 67 the Passport fuse to reset the MY FORD MOBILE APP and regain control over charging the battery.
( I charge my vehicle at 1 in the Morning ). Pulling that fuse 4 or more times a year to get things working was a real pain not to mention removing the cover each time. Since Ford never resolved the problem
with the communication issue this was a great fix. Thanks etrailer and Bule Ox this is a great work around.
Purchased this harness not for a trailer, but for my failing BCM (body control module). My car's headlights remain on even after I leave it. The solution was to put in the headlight fuses every night and unplug them at every stop, or pay upwards of $xxxx for the dealer to replace it (dealer specific part I could not replace it myself as my keys needed to be synched with new module.) Being right in the middle of the pandemic and just before losing my job, spending that kind of cash wasn't an option.
The solution in the end was this $xx harness. The whole unit stays snug under my dash and I cut out a hole for the switch. Every night it's just one extra switch I have to flip instead of getting upside down on the ground and pull fuses. Payed for itself. Very, very happy.
The Blue Ox fuse bypass switch was just what I needed. The delivery was quick and installation was made easy by the instructions and video. Works as described and I will be trying out soon on our next trip towing our 2012 CRV. Thank you etrailer for making my life easier.
Great service and products
It was delivered today and I installed it today wasn't to hard.
Alittle Pricy but it makes things so much easier and works fine !
Carol
The postman brought my package earlier than I expected! Real happy with that. The box was damaged in shipping but the product inside was OK. The packing was very good. I installed the Blue Ox switch and I am ready to tow my Traverse with the motorhome.
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.